• March 2018
    ICCG 12 conference, June 13, 2018, 3 PM, Würzburg, Germany:
    Wolfgang Theiss will give a presentation called 'Up and down – shifting the limits of optical spectroscopy in large area coaters'

  • January 2018
    Software training: New strategy starting January 2018

    Our software packages are powerful - but also complex. The large variety of possible applications and numerous program features are certainly demanding. An introductory training with focus on the user interface and basics of optical modeling significantly shortens the time it takes new users to get going.

    Since our users are distributed world wide we have done more and more remote online training during the last years. It turned out that in most cases the number of questions during the sessions has been small, i.e. usually there is not much interaction. With this rather one-directional lectures in mind, we have decided to adapt our working style concerning software training.

    Starting in January 2018 we will start to publish a series of recorded lectures, available and free of charge for everybody. New users can follow these sessions at their on speed and whenever there is space in their agenda. In addition to the introduction of training videos we will intensify the FAQ section of our website, hoping that we will give answers to most typical questions that may arise.

    If users are interested in deeper discussion we offer to reserve some hours of intense explanations -however, this will not be in real time, and it will not be for free. We will write answers to written questions or prepare short videos, with some time delay between questions and answers. This way everybody can work at a reasonable time of the day, and no information is lost. You can simply repeat a complex procedure and watch it as long as necessary.

    We hope that this new concept will prove useful and comfortable for all participants.

    Current video tutorials

  • December 2017
    ICCG 12: We will be part of the exhibition, showing software and hardware for optical thin film analysis and design.

  • January 2017
    SVC Techcon 2017: Wolfgang Theiss will give a presentation named 'Print&Play: WOSP hardware for optical thin film analysis' on May 3, 1 PM. The session title is 'Vendor Innovators Showcase'.

  • January 2017
    SVC Techcon 2017: We will be part of the exhibition, showing software and hardware for optical thin film analysis and design. Our booth number is 107.

  • January 2017
    Our main office is now in 11875 E Elin Ranch Road, Tucson, AZ 85749, USA.

  • February 2016
    ICCG 11 conference: We will be part of the exhibition, showing software and hardware for optical thin film analysis and design. The exhibition days are June 13 and 14, 2016, in Braunschweig, Germany.

  • August 2015
    Hardware development:
    After many years of pure software development we have started to build prototypes of new hardware products. We will focus on systems that record reflectance and transmittance spectra of glass or plastic pieces - both on the desktop and in production. Probeheads for various angles of incidence (8°, 30°, 45°, 60°) will be available, prepared for array spectrometers of various price classes.

  • April 2015
    Here are screenshots of the presentation "Do it Yourself – Automated Thin Film Design using Genetic Algorithms" given at the SVC TechCon in Santa Clara:

    Screenshots "Do it yourself"

    During the presentation a coating for passive cooling devices has been invented by the genetic algorithm that was presented. In addition, an even better and simpler design was suggested: A silver layer with a thickness in the range 50 ... 200 nm is sandwiched between a covering glass of 10 to 500 micron thickness and a substrate which might be glass, steel or something else. To our knowledge no patent exists for such cooling devices. We would like to stress that Wolfgang Theiss is the first to describe this idea.

    The screenshots of the "Vendor Innovator's Showcase" contribution about our CODE software are available here:

    Screenshots "CODE 4"

  • March 2015
    We contribute to this year's SVC conference in Santa Clara:

    Wednesday - April 29, 2015 - 2:30PM - 2:40PM

    "CODE Software Generation 4 – Easy, Enhanced and Elegant Optical Thin Film Analysis and Design"

    Coatings for technical applications need optical characterization during research, design and production. Optical modeling is the method of choice to understand and optimize thin film properties. Our CODE software combines excellent modeling capabilities with very flexible graphical user interfaces. Version 4 is dedicated to simplify the necessary steps for good solutions. Unexperienced or occasional users are guided by a few mouse clicks to a satisfying solution of their problem. Power users get advanced tools to organize their work and to built up their own network of thin film solutions. Simple and advanced applications of CODE are shown in a live demonstration of the software.

    Thursday - April 30, 2015 - 9:40AM - 10:00AM

    "Do it Yourself – Automated Thin Film Design using Genetic Algorithms"

    The selection of an appropriate thin film stack as solution for a given optical design problem requires experience. First the materials have to be selected and put into the right sequence, then the layer thicknesses have to be optimized. Whereas the final thickness adjustments can easily be done by a computer, material selection is usually ‘man made’. If a thin film expert is not available for some reason, the development of the coating is blocked. One can overcome this problem applying a genetic algorithm to thin film design; In many cases it is sufficient to state the optimization problem and let the algorithm develop the solution in an evolutionary process. The principle of the method is explained, and its strength and limitations are discussed. Typical industrial thin film stacks (architectural glass coatings, AR coatings, optical filters) are used to demonstrate the application of the method.

  • October 2014
    Our website will be down for a maxium duration of 3 hours on Monday, October 20, in the period 00:00 AM to 07:30 AM (CEST). This will also affect our license server.We are sorry for this inconvenience.

  • August 2014
    Take a look at our new system to document program modifications and bug fixes

  • August 2014
    Let's meet in Leipzig at 10. ThGOT Thementage Grenz- und Oberflächentechnik und 4.Optik-Kolloquium in Leipzig. Wolfgang Theiss will give the presentation "Alles gut? Produktionskontrolle dünner Schichten durch optische Modellierung in Echtzeit" on September 4, 1:30 PM). The talk will be in German.

  • January 2014
    Let's meet at the SVC TechCon in Chicago (May 2014). Wolfgang Theiss will give the presentation "Serial, Parallel and Serious - Optical Production Control for Thin Film Deposition Systems" in the session "Large Area Coatings" (Paper number: L-18, May 8, 2014, 2:20 PM)

  • January 2014
    Or see us at the ICCG10 conference in Dresden, Germany (June 2014). Wolfgang Theiss will contribute a short course about "Metrology for Large Area Glass Coatings" (Sunday, June 22, 2014)

  • March 2013
    We have collected a list with publications related to our products.

  • February 2013
    In April 2013 we will release the optics course VisualOptics. It gives a quick introduction to thin film optics with a lot of interactive pages, suitable for self-learning as well as for teaching others. Click here to see the VisualOptics leaflet..

    The latest version of our installer program run_this_first.exe contains a backup feature. To backup your existing SCOUT or CODE installation copy the new application file to your program directory (like c:\scout or c:\code) and run it. Press the 'Generate backup folder' at the bottom and follow the instructions. The backup routine will generate an external folder that contains everything needed to re-install the software.
    The latest run_this_first version is available in the 'Tools' package.

  • November 2012: Good bye paperwork!

    We decided to deliver our products without printed manuals. Several reasons lead to this step: Besides saving trees and reduced transport effort we like the idea to supply our customers with electronic documentation that can be updated easily. Reading on electronic devices becomes more and more comfortable, and we think it is now time to make the change.

    In order to provide you with the right type of document we generate 4 flavours: Each manual is available as

    • PDF (for reading on various devices - and printing, if you like)
    • ePUB (to be read on iOS devices like iPads or ebook-readers)
    • *.chm file (Windows help)
    • web page.

    Click here to get our electronic manuals.

    The web page versions are also accessible directly in the software using the ? submenu.

  • April 2012: There is a new section about the design of thin film solar cells with CODE.
  • February 2012: Attention CODE users! We have implemented the 2011 changes of the standard EN410 in our products. If you compute U- and g-values or UV transmission according to this standard, the values will be slightly different from what you have got up to now. If you prefer to compute values according to EN410 prior to the 2011 modifications, you can do so: All affected objects have the option to ignore the changes. Be aware, however, that you must explicitly set this option.
  • February 2012: We will exhibit at the ICCG9 (International Conference on Coatings on Glass and Plastics) in Breda, the Netherlands (June 24-28, 2012).
  • January 2012: See us at the SVC TechCon in Santa Clara - we will be part of the exhibition (2012-5-1 and 2011-5-2). Our booth number is 852.
  • December 2010: We have started a frequently asked question (FAQ) section in the 'Support' area of our website. In case of problems, please consult the answers given there for quick help. If this does not help you to solve the problem, feel free to ask for a specific solution by e-mail or phone.
  • December 2010: See us at the SVC TechCon in Chicago - we will be part of the exhibition (2011-4-19 and 2011-4-20). Our booth number is 1042.
  • December 2010: The beta phase of SCOUT 3.4 and CODE 3.4 is over and we ship the actual versions of both products to new customers.
  • February 2010: We will be exhibitors at the 8th International Conference on Coatings on Glass and Plastics (2010-6-13 to 2010-6-17) in Braunschweig, Germany.
  • January 2010: See us at the SVC TechCon in Orlando - we will be part of the exhibition (2010-4-20 and 2010-4-21). Our booth number is 915.
  • March 2009: W.Theiss will give the presentation (in German) "Modell vs. Statistik: Interpretation und Auswertung optischer Spektren durch Computer-Simulation" at the seminar 'Material 2009' in Potsdam, June 17 and 18, 2009 (organized by Perkin-Elmer Germany)
  • December 2008: See us at the SVC conference in Santa Clara - we will be part of the exhibition (2009-5-11 and 2009-5-12). Our booth number is 708. Monday afternoon at 1:50 W.Theiss will give a presentation on optical production control (session Large Area Coaters).
  • September 2008: The beta phase of SCOUT 3 and CODE 3 is over and we ship the actual versions 3.03 of both products to new customers.
  • Starting in 2009, we will offer training courses< for groups of 1 - 10 persons in our new training room: